WT-102 is a non-hazardous, non-toxic, non-carcinogenic, Class A, interior, latex-based flame retardant intumescent coating for application over wood and other decorative surfaces.
TECHNICAL DATA:
*Apply two coats of WT-102 at the rate of 200 square feet per gallon.
*One gallon covers 100 square feet of useable product in two coats.
*Appearance - consistency of paint:
*Available in white, black and color-base for mixing of custom colors. Use water-soluble dispersible tint. Tinting Guidelines are available and should be followed.
*Weight - 5-gallon pails weigh 60 lbs.
*Storage - do not allow to freeze. Store between 40ºf and 80ºf.
*Shelf life is two years if containers are unopened.
*Do not add water or change chemical composition in any way.
*Closed containers exposed to heat may rupture due to pressure build-up.
APPROVALS:
California State Fire Marshal Approval #C-10000, ASTM E84, Meets ANS No. 2.5, NFPA 255, UL No. 723, UBC No. 42-1 fire retardancy requirements with a Class A flame spread, Previously Approved by ICBO Report #3656 and City of Los Angeles Research Report #RR 24303. BS:476 Part 7: 1987, BS 5867: Part 2: 1980
PREPARATION AND APPLICATION INSTRUCTIONS:
Before using, user must determine suitability of this product for its intended use.
*Prepare substrate by sanding and removing any silicone or oil based coatings that may already be on wood. WT-102 will not adhere to a surface that has not been properly prepared.
*Applicator must wear paint goggles, respirator, and gloves.
*WT-102 must be mixed well.
*Coverage is 1 gallon per 100 square feet, applied in two coats, (or 200 square feet per gallon). Material may be applied with an air or airless spray, brush or roller. Cover entire exposed area.
*Allow first coat to dry thoroughly before applying second coat.
*Certification for the State of California requires application by a California State Certified Applicator to comply with requirements of the California State Fire Marshal.
Add this product to your cart below
under 'ordering options'.
|
